VIM tips & tricks 1: "Show normal mode commands"

If you are a Vim beginner and want a little bit of visual help for your commands in 'normal mode'

use this command::set showcmd

Reacties

Populaire posts van deze blog

Add Costum Keyboard Layout to XFCE

How to create this keyboard layout for Xfce : Works also on Mate!!!! It is a lightly modified version of the dvorak programmers layout. I changed the lower left row. So you can easily undo, cut, copy & paste with your left hand and keep the other hand on your mouse. Step 1. Edit file: /usr/share/X11/xkb/symbols/us Insert this snippit: // programmer Dvorak wim's style, by Wim Stockman <wim.stockman at gmail dot com> // Main features: Numbers are in shift position (like French), symbols have been // switch position of z x c v to the bottom left for easy shortcut handling partial alphanumeric_keys xkb_symbols "dvp-wim" { include "us(dvorak)" name[Group1] = "English (programmer Dvorak Wims style ZXCV)"; // Unmodified Shift AltGr Shift+AltGr // symbols row, left side key <TLDE> { [ dollar, asciitilde, dead_tilde ] }; key <AE01> { [ ampersand, percent ] }; key <AE02> { [ bracketleft, 7, currency ],...

Meer lezen

Install Arch Linux on Raid0 with GPT and Grub 2

Install Arch Linux on Raid0 with GPT and Grub 2 First start by downloading the iso. dd it onto usb stick boot iso then start by setting up internet connection test it : ping www.google.com Load the appropriate RAID (e.g. raid0 , raid1 , raid5 , raid6 , raid10 ) modules. We will use raid0, and raid1 modprobe raid0 modprobe raid1 Prepare Hard Drives Each drive will have 100Mb for /boot these will be in raid1 for safety The / partition takes the remainder of the drive install gdisk for formatting in GPT pacman-db-upgrade pacman -Syy pacman -S gptfdisk gdisk /dev/sda Add a new partition: n Select the default partition number: Enter Use the default for the first sector: Enter For sda1 type the appropriate size in MB (i.e. +100MB and +2048M ). Select BIOS BOOT PARTITION as the partition type: ef02 !!!very important Write the table to disk and exit: w Repeat for the second partition on /dev/sda but for step 4 just press ENTER...

Meer lezen

Converting HEIC , HEIF files with Image Magick

Convert alle HEIC files in a directory to PNG file First off all you have to compile imagemagick from source with heic support and some other libs: Here are the instructions for this: cd /usr/src sudo git clone https://github.com/strukturag/libde265.git sudo git clone https://github.com/strukturag/libheif.git cd libde265/ sudo ./autogen.sh sudo ./configure sudo make sudo make install cd /usr/src/libheif/ sudo ./autogen.sh sudo ./configure sudo make sudo make install cd /usr/src/ sudo wget https://www.imagemagick.org/download/ImageMagick.tar.gz sudo tar xf ImageMagick.tar.gz cd ImageMagick-7* sudo ./configure --with-heic=yes sudo make sudo make install sudo ldconfig if you want to convert all files in a directory to png from heic. For some reason mogrify from imagemagick refuses. So I had to do it with convert: for file in *.HEIC; do convert $file $file.PNG; done The only drawback with convert is that it changes the date of the new files to th...

Meer lezen

Wim's Prog Xperience

Zoeken in deze blog